Transportation Changes in Morocco essays

Transportation Changes in Morocco essays Transportation is a movement from place to place by some type of vehicle - car, boat, plane, train, motorcycle, skateboard - whatever moves us from point A to point B. The transportation system has changed and developed in many ways over the past two or three decades. In Morocco, which is my country, transportation has changed dramatically from my grandmother's day to the present including the cost of transportation, it's rules and regulations. Some of those changes have improved the transportation system while other changes have been detrimental. First, the time component is an important consideration and it's associated with service. In the past, 40% of the roads in Morocco were in poor condition. This issue led to wasting time getting from one place to another. Today, it's easier than ever because back roads have improved and freeways have been built to solve the congestion issue. As a result, this change helped improve the entire economic system in Morocco. For example, most companies are no longer wasting time delivering their products by using old, dangerous roads, or poorly constructed freeways. Second, the cost of transportation in my Grandmother's day was much less expensive than today. In the past, people visited their families every holiday and during the summer because the cost of transportation was affordable; but today, the cost of transportation in Morocco has increased two or three times to what it was before due to high fuel costs, security and safety issues. So families with low incomes can't afford transportation - leading them to work and shop as close to home as possible. In this way, improved transportation in Morocco has stopped the overall betterment of the country. Finally, the new rules and regulations of transportation in Morocco are not accepted by all the Moroccan people. In addition, in my Grandmother's day, people were afraid of breaking the law. That is why most of them followed rules and ...

Art Of Portraiture

Art Of Portraiture Essay The three works that I chose that are art of portraiture are Head of a King, Mask of an Lyoba, and Mother Goddess. The first two portraits are West African Art from two different tribes, Ife, who created the Head of a King and Benin, whom created the Mask of an Lyoba. The Mother Goddess is an Aztec piece. These groups of people are from different cultures, time periods, and share different religious beliefs. The similarity of the groups is the symbolic meaning the portraitures brought to its people. The first work is the Head of a King. This Ife creation altered the perception that scholars had of the tribe. It was known that the Ife tribes did not do portraits because of the spirits that could harm the subjects. The sculptures that were discovered all seemed to resemble rulers, so the conclusion was that the institution of kingship and the need to revere royal ancestors were strong enough to overcome concerns. Also the figures were naturalistic. The proportions of the few knownful figures are characteristically African.. The heads may have been taken from life models, but seem more like idealized images. An example is of the proportions of the head of the sculpture. These proportions probably reflect a belief in the heads importance as the abode of the spirit, and the focus of the individual identity. Life is the sacred city of the Yoruba people, were naturalistic sculpture began. The Benin tribe arose after the Ife, and was greatly influenced by their art. Their portraits were also naturalistic, but as they grew more knowledgeable in art, they drew away from the naturalistic works of the Ife people into stylized works of their own. The Mask of an Lyoba is a beautiful ornamental mask of royalty. This works shows that the people no longer use the naturalistic approach, but a bold, more idealized, representation of its people. The art of Benin is a royal art, only the oba could commission the works. This work was commissioned in ivory, but most of the works were commissioned in brass. The Benin transition from naturalistic to stylize is better explained in the brass heads. It ranges from small, thinly cast, and naturalistic to large, thickly cast, and highly stylized. The conclusion of scholars is that in their Early Period, their heads were small and naturalistic from the Ife influence. Heads then grew increasingly stylized during the Middle Period. Then in the Late Period, the heads were very large and heavy, with angular stylized features and an elaborate beaded crown. In Mexico there was also portraitures. Specifically in the Aztec Empire were the Mother Goddess was created. This was a strong and powerful empire that was divided in classes. The religion was based on a complex pantheon that combined the Aztec deities with more ancient ones that had long been worshiped in Central Mexico. According to the Aztec belief, the gods created the current universe at the ancient city of Teothhuacan. Which is similar to the Ife belief that Gods came down and created the people. The culture and purpose of the people is then to worship and honor their gods forever. This was done by sacrifice and in their art. We are aware of the religion and the beliefs of the Aztec people because of their art. The gods were represented in statues and paintings that were narratives to teach their people and show respect to the gods. The Mother Goddess was a broad shouldered figure with clawed hands and feet has a skirt of twisted snakes. A pair of serpents, symbols of gushing blood, rise from her neck to form her head. Their eyes are her eyes; their fangs, her tusks. The writhing serpents of her skirt also form her body. Around her stump of a neck hangs a necklace of sacrificial offerings- hands, heart, and a dangling skull. READ: Art and humanities test 1 EssayDespite the surface intricacy, the sculptures simple, bold, and blocky forms create a single visual whole. This dramatic impact was also heightened by the color. This portraiture is very symbolic. Unlike the previous two works it is not of the rulers or the people at the time, it is of a god. But much like the first two works it is also idealized. This is what their mother god that guides them should look like. The Ife people created works that were spiritual and revealing their groups identity. The Benin people, once understanding art created stylized works that also expressed their identity, far more than anything naturalistic did. All three works represents the people and what is important to them. For the Aztec people it was their gods, and representing them in a dramatic and powerful way to teach their people. While the Ife people believed that the gods created them in likeness to themselves, so the portraits were also of their people in the ideal form that the gods wanted. The Benin culture were fascinated by art, and wanted to show respect to their rulers by their representation of them.

Important of academic skills for tourism students Essay

Important of academic skills for tourism students - Essay Example The main academic skills that help tourism students to get employed and advance in their careers faster include managerial, communication, language, customer service, business, and socialization (Page, & Connell, 2010). This paper will analyze the usefulness of these academic skills in shaping the future career of tourism students. Tourism students must have efficient communication skills for them to be employed in the sector. This is because communication is the main instrument that unites the supply and demand sides in the sector (Bobanovic, & Grzinic, 2011). This is because the supply and demand sides are made up of individuals who must interact successfully for them to achieve equilibrium. However, since the supply side is the one that provides services to the demand side, it means that suppliers in this industry need to be able to communicate with any individual who demands their services. The main factors involved in communication in the industry include language, correct pronunciation of words, and courtesy when speaking to the client (O’Shannessy, Minett, & Hyde, 2002). Since individuals may not be able to acquire these skills without training, it means they have to study them in school where there are tutors who teach them how to pronounce words correctly and be courteous. A major element that is involved in communication is language because it is the main uniting factor between suppliers and their clients. Tourism students need to study English language because it is the most common international language in the twenty first century (Bobanovic, & Grzinic, 2011). Numerous countries in the world have chosen to make English a national language because it helps them to interact with other English-speaking nations. Therefore, since tourism is the main way in which the countries interact, the service providers who are previously students should study the language while in school. This is because studying the

Workplace Discrimination Research Paper Example | Topics and Well Written Essays - 1000 words

Workplace Discrimination - Research Paper Example Humans have always developed ways of stereotyping their fellow human beings using age, race, gender, religion, or ethnicity as their basis. It is only in current days that individuals have taken the trouble to look at discrimination as a challenge instead of looking at it as a solution. For example, segregation on the basis of race was at one point taken to be part of the natural order. Moreover, the right to vote was withdrawn from people belonging to the members of the female population to protect the different communities, solely because females, by virtue of their appearance, were presumed not to posses the survival characteristics. In addition, there is no society which escaped the negative components presented by discrimination. Also, there is no society which can claim that it does not have elements of discrimination in its different structures today. Racial discrimination also has a long history, with a number of people seeing racial discrimination as a faultlessly natural fe ature of life. Nonetheless, in recent times, racial discrimination in the work place has become a more significant subject. Its increased presence may be the result of the opposition of different elements; the workforce that is still continuing to be racist, and a recession that places jobs at a premium and makes employers to be particularly choosy during employment (Feagin, 2006). This paper will look at racial discrimination in the modern workplace. The paper will accomplish this by analyzing a current case of workplace discrimination in drawing conclusions regarding the effects of discrimination on organizational productivity. In America, it is constitutionally unlawful to engage in any form of discrimination against employees based on any reason, but the cases and evidences of workplace discrimination seem to be increasing with every passing day. In today’s world of competition, it has become extremely important for organizations to stop workplace discrimination because i t is a factor that not only results in decreasing organizational productivity but also affects the quality of business processes. Although the government of the United States has implemented effective laws, such as, Title VII of the Civil Rights Act 1964 to stop workplace discrimination, there is still a lot more that needs to be done to keep this negative element out of the workplace. Nevertheless, the basic federal laws that deal with racial discrimination in the workplace can all be found in Title VII of the Civil Rights Act 1964. By and large, Title VII of the Civil Rights Act 1964 disallows employers from engaging in the following activities: refusing or failing to sign up an employee on the basis of their race; providing workers lesser benefits or paying a worker less because of the racial orientation; failing to give promotions, opportunities, or benefits to a worker because of their race; and segregating or not properly classifying applicants or workers by race (Memmi, 2000) . In addition, employment agencies are not allowed to reach decisions on work assignments on the basis of a person’s race. Also, labor representatives and unions cannot expel people or refuse membership to individuals because of their race. Discrimination on the basis of race in the workplace can be illustrated in a number of ways, some of which can be obvious or blatant. Nonetheless, racial discrimination can frequently be restrained and more difficult to notice, for example, an employer failing to promote an employee or higher an applicant because of their racial makeup. Therefore, it may be asserted that a worker who experiences unfavorable treatment because of his race is a victim of racial discrimination. Additionally, racial discrimina

Character Analysis of Wolfgang von Goethes The Sorrows of Young Werthe

Character Analysis of Wolfgang von Goethe's The Sorrows of Young Werther The purpose of this papers it to give general information about the author, Wolfgang von Goethe, and introduce as well as analyze the main character of one of his most influential works: The Sorrows of Young Werther. The protagonist of this series of confessional letters, Werther, is in fact a tragic figure who committed suicide as a result of his loneliness and critical approach to society, as well as his obsession for a woman, Lotte, whom he could not eventually conquest. Wolfgang von Goethe was a German poet, as well as dramatist, novelist, and scientist who lived between 1749 and 1832. Goethe's poetry expresses a modern, and revolutionary view of humanity's relationship to nature, history, and society; his plays and novels reflect a deep understanding of human individuality. According to the 19th-century English critic Matthew Arnold, Goethe must be considered not only "the manifest centre of German literature" but also one of the most multitalented figures in the entire world of literature. Goethe was born on August 28, 1749, in Frankfurt am Main, as a son of a government official. From 1765 to 1768 he studied law at Leipzig; there he first developed an interest in literature and painting and became acquainted with the dramatic works of his contemporaries Friedrich Gottlieb Klopstock and Gotthold Ephraim Lessing. Their influence and his own connection to the daughter of a wine merchant at whose tavern he dined are reflected in his earliest poetry and in his first dramatic works. These early plays included a one-act comedy in verse, Die Laune des Verliebten (The Lover's Caprice, 1767), and a tragedy in verse, Die Mitschuldigen (The Fellow-Culpri... ... incapable of establishing close relations with people he did not believe were equal to him. As a result o desperation, he creates an ideal in Lotte who, however, can never love him back. Not only due to her engagement to Albert but also due to the large support she got from her family, in opposition to Werther. This short novel, even though written almost 250 years ago, demonstrates that Werther's critique of society is still relevant in today's society. It does not matter whether one is an aristocrat or a low class worker, everybody at the end need "empathic love."7 As Goethe claims in page 64 of his work "Without doubt, the only thing that makes Man's life on earth essential and necessary is love." Works Cited Goethe, Johnann Wolfgang von. The Sorrows of Young Werther. Trans. Elizabeth Meyer and Louise Bogan. Forward by W.H. Auden. New York: Vintage, 2005.

Case report toshiba notebook Essay

In this case discussion we are going to discuss the Toshiba’s notebook assembly line. At this assembly line multiple laptops are produced every day with a combination of employers and robots. We will be looking at it from different ways so we can find multiple ways to enhance the efficiency of the assembly line. We have to look at it as an supply chain manager. This means investigating it and keeping in mind the numerous aspects that the assembly line is influenced by. If we look at the assembly line in this way we will be able to spot several problems which can be solved and can result in a more efficient assembly line. The most obvious problems we spot are the number of tasks per assembly line position. Another problem is that every workstations labour time various too much. This results in several bottlenecks that has negative effects on the efficiency and production time. They differ from 5 seconds to 120 seconds. If these two problems are solved we think the assembly line will be much more efficient and thus more profitable. The first problem we discussed is the number of tasks per assembly line. We see this as a problem because this isn’t how an assembly line should be. The essence of an assembly line is that at every station a simple task is done. Maybe two but it has to stay a simple action. This ensures a smooth flow of the production process. What you see at this assembly line is that there are three positions where one operator has to fulfil multiple tasks. This does not enhance the efficiency because the operator has to switch every time he finishes a single task. A solution for this problem is to implement more assembly line positions. This will result in a smoother and more efficient flow of the production. In a situation like that every operator has to do only one or two tasks instead of six. This is beneficial because when you look at the production of a car for instance. If you let one employer built one entire car it will take much longer than when you use an assembly line in which multiple employers are working at that car one after the other. The solution for this problem we named is to implement more assembly line positions. This means either to hire more employers or to install more robots. There has to be investigated whether this solution is cost-effective. If the purchase of a new robot does not result in a high enough efficiency rise there has to be considered another solution. The second problem we named is the difference in time between the workstations. The workstations vary between 5 and 120 seconds per task(s). this creates problems because when the production times are not more or less the same, bottlenecks are formed. When a situation like that occurs, production processes that do run fast, have to slow down in order to be at the same pace as the slower ones. This means that that production process is not producing at its most efficient rate. There are two ways of solving this problem. The first one is to make a proper arrangement of the different tasks. Another way is to make the labour time shorter. A way of doing this is to re-arrange the tasks. Not the sequence in which they are done but the content of the tasks itself. If you change the content you can establish a shorter labour time. Our first solution of changing the arrangement of the tasks can be combined with the very first problem. Therefore we suggest to try the first solution first to reach an high as possible efficiency level as possible. If the goals are reached with the first solution alone you do not have to use the second solution. You can consider the second solution but if the first solution alone guarantees the wanted goals you can save money by not using the second solution. Apart from these two solutions there are multiple ways to improve your assembly line. We have chosen for these two ways because we believe these two are most worth for your money. What we mean by saying this is that for the amount of money you have to invest at first, you get the most profit of. You can for instance purchase the most modern robots and create the perfect working conditions but you have to consider the profits against the initial wages. Our solutions can be explained with this precedence graph. Our first solution can be used very easy. Our first solution was to use more assembly line points. As you can see in this graph the last three positions are not used. On these empty spots new assembly line point can be created. In this way you can divide the different tasks over the assembly line. This results in a shorter labour time. Our second solution can also be explained with this graph. As you can see there is a very big difference between the various labour times. If you make sure these labour times are more or less the same the flow of production will be a lot smoother and thus more efficient and quicker. This solution can be combined with the first one. If you are going to make the assembly line longer by dividing the tasks over more points you can, at the same time, make the labour times more coherent. We think that our solutions will provide a sustainable situation in which the production process runs a lot smoother and more efficient. The reason why we think our solutions are the most cost-profitable is because you can combine them. By changing one thing, you solve two things which both result in a more efficient, faster, smoother and more profitable assembly line.

The Doctrine Of Biblical Inerrancy - 1076 Words

The Bible has challenged many people as a piece of literature containing history, poetry, and written letters. Some would argue that the contents of Scripture are inaccurate, however would still agree that it carries significant value as a piece of literature. Conversely, those who ascribe to the teachings of the Bible are dealt with questions about the authority and inerrancy of Scripture. It is becoming increasingly important that Christians understand and embrace the full inerrancy of Scripture. The theological implications dictate the contemporary church’s view of God himself. Also, there is rising arguments versus the inerrancy of Scripture found in postmodernism. Beyond an all-out attack on the inerrancy of the Bible by liberalism, even some Christians argue the notion that it is irrelevant for theological conversations within the contemporary church. Historically speaking, churches that have abandoned the inerrancy of Scripture, have also gone on to abandon theological foundations of faith, which has eternal consequences. The office of Biblical inerrancy must be defended in order for a strong foundation of Biblical theology. The major elements of Bibliology are the authority, inspiration, infallibility, and the inerrancy of Scripture. Many believers are willing to exercise faith towards these areas, such as authority and inerrancy of Scripture. In some cases, authority is assumed when a believer surrenders the authority of their life to God, the divine author ofShow MoreRelatedThe Bible Is An Important Aspect Of Our Christian Lives844 Words   |  4 Pagesreveals himself and His authority through Scripture. The Bible appoints its own authority by claiming to be from God and containing the words of God. â€Å"The authority of the Bible is established by its own claims. It is the word of God.† (Elwell, 154). Biblical inspiration is â€Å"a supernatural influence of the Holy Spirit upon divinely chosen agents in consequence of which their writings become trustworthy and authoritative† (Elwell, 160). In other words, the Holy Spirit inspired and was involved with theRead MoreBible Inerrancy3383 Words   |  14 Pages RESEARCH PAPER Inerrancy of Scripture: Authority by Inspiration THEO 525 LUO (spring 2012) Systematic Theology I Liberty Baptist Theological Seminary Jacqueline M. Jones (ID# 24515464) March 9, 2012 Thesis Statement The divine inspiration of Scripture guarantees its inerrancy and authority. Table of Contents [ No table of contents entries found. ] Introduction Introduction Under the doctrine of biblical inerrancy, in what sense is the Bible authoritative? This is a question that has plaguedRead MoreNotes On Inerrancy And Inspiration Essay759 Words   |  4 PagesFedner Faustin MLA THEO 201 B01 Short Essay on Inerrancy and Inspiration Men, as worshipping creatures, are always looking for a supreme being to adore. They always are looking for the source of truth, and asking many questions regarding what they should believe because there are many sects out there which teach different doctrines, or even deny the deity of God and worship other gods. When it comes to the Holy Bible, people are digging further in the outside world to get some responses that areRead MoreShort Essay on Inspiration and Inerrancy of the Bible890 Words   |  4 PagesDavid Brenneman THEO201_D10_201230 Short Essay #1 Short Essay on Inspiration and Inerrancy of the Bible The inspiration and inerrancy of the Bible is a critical topic to our Christian faith. If we are to understand the Bible and its commands on how to live and be saved through faith, we need to be sure that we know how the Bible was written and whether or not the Bible is authoritative. To say that the Bible has authority is to claim that the Bible is the very word of God. The Bible is theRead MoreThe Ten Avenues Of Revelation1218 Words   |  5 Pagesduring the creation of the world but God spoke to Moses in his writings. Lastly, â€Å"other material† that is included are those which are emotional and not saved.5 Others however are not true but are accurately recorded such as lies of Satan. The biblical doctrine of inspiration provides different avenues of inspiration for the Bible. The defective ideas on inspiration are first â€Å"Natural Inspiration†.6 This meaning that those who wrote the bible did not use divine inspiration from God and instead reliedRead MoreEssay on The Failings of Fundamentalism958 Words   |  4 Pagesare upholding the laws of the Supreme Being, thus keeping society on the right path. Fundamentalists’ core beliefs â€Å"[are] encapsulated under the rubric of ‘the inerrancy of Scripture,† the idea that the Bible is God’s perfect word, the clearest expression of God’s plan for humanity (Marsden). With this comes the concept of Biblical literalism, that â€Å"the historical events recorded in the Bible†¦are accurate,† not parables or allegories—they believe God spoke plainly and clearly, not in confusingRead MoreDescription of The Divinity of the Scriptures1553 Words   |  7 PagesGod is revealed through them. The word â€Å"inspiration means breathed into. By [the term] â€Å"divine inspiration† of the Bible we mean that the Holy Spirit breathed into or guided God’s chosen servants who then made known the truth they received† (The Doctrine We Adorn 6). This is how the Bible was constructed God inspiring and man writing it out. The scriptures of the Old and New testaments complement each other throughout the Bible. The teachings are never inconsistent from the beginning of the BibleRead MoreRevelation Is The Act And The Result Of God957 Words   |  4 PagesThe Infallibility and the Inerrancy of Scripture Inerrancy means when all facts are known, the Scriptures in their original autographs and properly interpreted will be shown to be wholly true in everything that they affirm, whether that has to do with doctrine or morality or with the sciences. Infallibility means the Scriptures are completely trustworthy as a guide to salvation and the life of faith and will not fail to accomplish its purpose. Evidence of the Inerrancy of Scripture 1) The supernaturalRead MoreExplain the Purpose of Hermeneutics1564 Words   |  7 Pagesprimary need of Hermeneutics is to determine and understand the meaning of Biblical text. The purpose of Hermeneutics is to bridge the gap between our minds and the minds of the Biblical writers through a thorough knowledge of the original languages, ancient history and the comparison of Scripture with Scripture. Through Hermeneutics, Biblical Interpretation can be achieved in three ways; historically, the message and the doctrine. The Bible is totally authoritive and inspired by God, however is it propositionalRead MoreBiblical Truths Of The Christian Bible915 Words   |  4 Pagescontinual in parting of Biblical truths. Henceforth when the Word of God is preached in expository fashion and systematically taught in line with sound doctrine to the children of God, the servants of Christ become fully equipped with the truth of Scripture that is mature in sound doctrine; thus, not deceived and tossed to and fro by the wiles of the devil through the cunning craftiness of his demonic ministers who twist the plain truth about Scripture by teaching the false doctrines of demons therefore